LogoSmartLife App dokumentatsioon
LogoSmartLife App dokumentatsioon
Avaleht
Help Center
Seadme võrguprobleemid
Ruuteri konfiguratsioon
Seadmete võrgukonfigureerimise juhend
Seadme võrguühenduse üldised küsimused
Bluetoothi seadistamise juhend
Wi-Fi seadme võrgukonfiguratsioon
Zigbee seadme võrgu ettevalmistamine
Network Provisioning for Other Protocols/Methods
Kuidas lisada seadet QR-koodi skannides?Kuidas kaamera kasutab võrgu konfigureerimiseks QR-koodi skaneerimist?Kuidas seadistada võrku 4G seadmetele?Kuidas juhtida Wi-Fi ja Bluetooth topeltrežiimi seadmeid ainult Bluetoothi kaudu?Kas Wi-Fi ja Bluetooth topeltrežiimi seadmeid saab lisada korraga kahe suhtlusmeetodiga?Kuidas seade kasutab internetiga ühendamiseks kaablirežiimi?NB-IoT seadmete ühendamise meetodidKuidas Seadistada Võrku NB Seadmete Jaoks?Kuidas saada Matter-seadmete võrgu sidumiskoodi rakenduses "Kodu"
Device Connection Failure
Device Offline
Rakenduse kasutamise probleemid
Home, Members & Room Management
Seadmete haldamine ja juhtimine
Lisaväärtusega teenused ja laiendatud funktsioonid
Kolmanda osapoole kontrollip robleemid
Seadme võrgu seadistamise juhend
Korduma kippuvad küsimused
Kasutusjuhend
Help CenterSeadme võrguprobleemidSeadmete võrgukonfigureerimise juhendNetwork Provisioning for Other Protocols/Methods

Kuidas kaamera kasutab võrgu konfigureerimiseks QR-koodi skaneerimist?

Samm-sammult juhend kaamera võrguühenduse konfigureerimiseks QR-koodi skaneerimise abil.

Follow these steps to configure your camera's network connection using QR code scanning.

Configuration Steps

1. Add Device Manually

  1. Open the app home page
  2. Tap the plus sign in the upper right corner
  3. Select Add Device
  4. Choose Manual Add
  5. Navigate to Camera/Lock category
  6. Select the corresponding category

2. Reset Device to Unconfigured State

Reset the device to the unconfigured state:

  1. Connect the power supply
  2. Press and hold the reset button on the device for about 5 seconds
  3. Wait until the indicator light of the device starts to flash quickly
  4. The device enters the network configuration state
  5. Confirm the indicator light or prompt tone
  6. Click Next in the app

Common Operation: Connect the power supply, press and hold the reset button on the device for about 5 seconds, until the indicator light of the device starts to flash quickly, the device enters the network configuration state. Please refer to the instructions for details.

3. Select Wi-Fi Network

  1. Follow the prompts in the app
  2. Select the corresponding 2.4GHz Wi-Fi network
  3. Enter the password

Network Restrictions: The camera does not support public wireless networks authenticated by mobile phone verification codes or other verification methods.

4. Display and Scan QR Code

  1. Click "Next"
  2. A QR code will be displayed on the mobile phone screen
  3. Align the QR code with the camera lens
  4. Position the code about 15~20cm away from the camera
  5. Hold steady so that the camera can scan it

5. Complete Configuration

  1. After the scan is successful, you will hear a "beep" prompt sound from the camera
  2. Click "hear the prompt sound" in the app
  3. The camera will enter the network configuration process

Troubleshooting

If the camera still fails to connect successfully through the above steps, please refer to:

Device Connection Failure

What should I do when my device fails to connect to the network?

Separate Wi-Fi Bands

(For most of Routers) How to configure separate Wi-Fi SSIDs for 2.4 GHz and 5 GHz bands? Split your network into 2 frequency bands.

Sisukord

Configuration Steps
1. Add Device Manually
2. Reset Device to Unconfigured State
3. Select Wi-Fi Network
4. Display and Scan QR Code
5. Complete Configuration
Troubleshooting