LogoSmartLife App Dokumentazioa
LogoSmartLife App Dokumentazioa
Hasiera orria
Help Center
Gailuaren Sare Arazoak
Routerraren konfigurazioa
Gailuaren Sare Horniduraren Gida
Gailuen sare-hornidurari buruzko galdera orokorrak
Bluetooth Hornidura Gida
Wi-Fi gailuen sare-hornidura
Zigbee gailuen sareko hornikuntza
Network Provisioning for Other Protocols/Methods
Nola gehitu gailua QR kodea eskaneatuz?Nola erabiltzen du kamerak QR kodearen eskanerra sarea konfiguratzeko?Nola konfiguratu sarea 4G gailuetan?Nola kontrolatu Wi-Fi eta Bluetooth modu bikoitzeko gailuak Bluetooth bidez soilik?Wi-Fi eta Bluetooth modu bikoitzeko gailuak bi komunikazio metodotan aldi berean gehitu daitezke?Nola erabiltzen du gailuak kable modua internetera konektatzeko?NB-IoT gailuen konexio metodoakNola Konfiguratu Sarea NB Gailuentzat?Nola lortu Matter gailuentzat sareko parekatze-kodea "Etxea" aplikazioan
Device Connection Failure
Device Offline
Aplikazioaren erabilera arazoak
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Gailuen sare-hornidura gida
Maiz egiten diren galderak
Erabiltzailearen eskuliburua
Help CenterGailuaren Sare ArazoakGailuaren Sare Horniduraren GidaNetwork Provisioning for Other Protocols/Methods

Nola erabiltzen du kamerak QR kodearen eskanerra sarea konfiguratzeko?

Pausoz pausoko gida kameraren sareko konexioa QR kode eskanerraren bidez konfiguratzeko.

Follow these steps to configure your camera's network connection using QR code scanning.

Configuration Steps

1. Add Device Manually

  1. Open the app home page
  2. Tap the plus sign in the upper right corner
  3. Select Add Device
  4. Choose Manual Add
  5. Navigate to Camera/Lock category
  6. Select the corresponding category

2. Reset Device to Unconfigured State

Reset the device to the unconfigured state:

  1. Connect the power supply
  2. Press and hold the reset button on the device for about 5 seconds
  3. Wait until the indicator light of the device starts to flash quickly
  4. The device enters the network configuration state
  5. Confirm the indicator light or prompt tone
  6. Click Next in the app

Common Operation: Connect the power supply, press and hold the reset button on the device for about 5 seconds, until the indicator light of the device starts to flash quickly, the device enters the network configuration state. Please refer to the instructions for details.

3. Select Wi-Fi Network

  1. Follow the prompts in the app
  2. Select the corresponding 2.4GHz Wi-Fi network
  3. Enter the password

Network Restrictions: The camera does not support public wireless networks authenticated by mobile phone verification codes or other verification methods.

4. Display and Scan QR Code

  1. Click "Next"
  2. A QR code will be displayed on the mobile phone screen
  3. Align the QR code with the camera lens
  4. Position the code about 15~20cm away from the camera
  5. Hold steady so that the camera can scan it

5. Complete Configuration

  1. After the scan is successful, you will hear a "beep" prompt sound from the camera
  2. Click "hear the prompt sound" in the app
  3. The camera will enter the network configuration process

Troubleshooting

If the camera still fails to connect successfully through the above steps, please refer to:

Device Connection Failure

What should I do when my device fails to connect to the network?

Separate Wi-Fi Bands

(For most of Routers) How to configure separate Wi-Fi SSIDs for 2.4 GHz and 5 GHz bands? Split your network into 2 frequency bands.

Edukien aurkibidea

Configuration Steps
1. Add Device Manually
2. Reset Device to Unconfigured State
3. Select Wi-Fi Network
4. Display and Scan QR Code
5. Complete Configuration
Troubleshooting