LogoTakardun SmartLife App
LogoTakardun SmartLife App
Babban Shafi
Help Center
Matsalolin Hanyar Sadarwar Na'ura
Saitin Hanyar Sadarwa
Jagoran Samar da Hanyar Sadarwa ta Na'ura
Tambayoyi Gabaɗaya kan Samar da Cibiyar Sadarwa na Na'ura
Jagorar Samar da Bluetooth
Saita Cibiyar Sadarwa ta Na'urar Wi-Fi
Samar Hanyar Sadarwa ta Zigbee
Network Provisioning for Other Protocols/Methods
Yadda ake ƙara na'ura ta hanyar daukar hoton lambar QR?Ta yaya kyamara ke amfani da daukar QR code don saita hanyar sadarwa?Ta yaya ake saita cibiyar sadarwa don na'urorin 4G?Yaya ake sarrafa na'urorin Wi-Fi da Bluetooth dual-mode ta hanyar Bluetooth kawai?Shin iya ƙara na'urorin Wi-Fi da Bluetooth dual-mode a lokaci guda tare da hanyoyin sadarwa biyu?Ta yaya na'urar ke amfani da yanayin kebul don haɗawa da intanet?Hanyoyin Haɗa Na'urorin NB-IoTYadda ake Saita Hanyar Sadarwa don Na'urorin NB?Yadda ake samun lambar haɗin hanyar sadarwa don na'urorin Matter a cikin "Home" App
Device Connection Failure
Device Offline
Matsalolin Amfani da App
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Jagorar Saita Hanyar Sadarwar Na'ura
Tambayoyin da ake yawan yi
Jagorar Mai Amfani
Help CenterMatsalolin Hanyar Sadarwar Na'uraJagoran Samar da Hanyar Sadarwa ta Na'uraNetwork Provisioning for Other Protocols/Methods

Ta yaya kyamara ke amfani da daukar QR code don saita hanyar sadarwa?

Jagorar mataki-mataki don saita haɗin hanyar sadarwa na kyamara ta amfani da daukar QR code.

Follow these steps to configure your camera's network connection using QR code scanning.

Configuration Steps

1. Add Device Manually

  1. Open the app home page
  2. Tap the plus sign in the upper right corner
  3. Select Add Device
  4. Choose Manual Add
  5. Navigate to Camera/Lock category
  6. Select the corresponding category

2. Reset Device to Unconfigured State

Reset the device to the unconfigured state:

  1. Connect the power supply
  2. Press and hold the reset button on the device for about 5 seconds
  3. Wait until the indicator light of the device starts to flash quickly
  4. The device enters the network configuration state
  5. Confirm the indicator light or prompt tone
  6. Click Next in the app

Common Operation: Connect the power supply, press and hold the reset button on the device for about 5 seconds, until the indicator light of the device starts to flash quickly, the device enters the network configuration state. Please refer to the instructions for details.

3. Select Wi-Fi Network

  1. Follow the prompts in the app
  2. Select the corresponding 2.4GHz Wi-Fi network
  3. Enter the password

Network Restrictions: The camera does not support public wireless networks authenticated by mobile phone verification codes or other verification methods.

4. Display and Scan QR Code

  1. Click "Next"
  2. A QR code will be displayed on the mobile phone screen
  3. Align the QR code with the camera lens
  4. Position the code about 15~20cm away from the camera
  5. Hold steady so that the camera can scan it

5. Complete Configuration

  1. After the scan is successful, you will hear a "beep" prompt sound from the camera
  2. Click "hear the prompt sound" in the app
  3. The camera will enter the network configuration process

Troubleshooting

If the camera still fails to connect successfully through the above steps, please refer to:

Device Connection Failure

What should I do when my device fails to connect to the network?

Separate Wi-Fi Bands

(For most of Routers) How to configure separate Wi-Fi SSIDs for 2.4 GHz and 5 GHz bands? Split your network into 2 frequency bands.

Abubuwan da ke Ciki

Configuration Steps
1. Add Device Manually
2. Reset Device to Unconfigured State
3. Select Wi-Fi Network
4. Display and Scan QR Code
5. Complete Configuration
Troubleshooting