כיצד המצלמה משתמשת בסריקת קוד QR כדי להגדיר את הרשת?

Follow these steps to configure your camera's network connection using QR code scanning.

Configuration Steps

1. Add Device Manually

1. Open the app home page
2. Tap the plus sign in the upper right corner
3. Select Add Device
4. Choose Manual Add
5. Navigate to Camera/Lock category
6. Select the corresponding category

2. Reset Device to Unconfigured State

Reset the device to the unconfigured state:

1. Connect the power supply
2. Press and hold the reset button on the device for about 5 seconds
3. Wait until the indicator light of the device starts to flash quickly
4. The device enters the network configuration state
5. Confirm the indicator light or prompt tone
6. Click Next in the app

3. Select Wi-Fi Network

1. Follow the prompts in the app
2. Select the corresponding 2.4GHz Wi-Fi network
3. Enter the password

4. Display and Scan QR Code

1. Click "Next"
2. A QR code will be displayed on the mobile phone screen
3. Align the QR code with the camera lens
4. Position the code about 15~20cm away from the camera
5. Hold steady so that the camera can scan it

5. Complete Configuration

1. After the scan is successful, you will hear a "beep" prompt sound from the camera
2. Click "hear the prompt sound" in the app
3. The camera will enter the network configuration process

Troubleshooting

If the camera still fails to connect successfully through the above steps, please refer to: