LogoDokumen SmartLife App
LogoDokumen SmartLife App
Laman Utama
Help Center
Masalah Rangkaian Peranti
Konfigurasi Penghala
Panduan Penyediaan Rangkaian Peranti
Soalan Lazim tentang Peruntukan Rangkaian Peranti
Panduan Peruntukan Bluetooth
Penyediaan Rangkaian Peranti Wi-Fi
Penyediaan Rangkaian Peranti Zigbee
Network Provisioning for Other Protocols/Methods
Bagaimana untuk menambah peranti dengan mengimbas kod QR?Bagaimana kamera menggunakan imbasan kod QR untuk mengkonfigurasi rangkaian?Bagaimana untuk menyediakan rangkaian untuk peranti 4G?Bagaimana mengawal peranti Wi-Fi dan Bluetooth mod dwi hanya melalui Bluetooth?Bolehkah peranti Wi-Fi dan Bluetooth mod dwi ditambah pada masa yang sama dengan dua kaedah komunikasi?Bagaimana peranti menggunakan mod kabel untuk menyambung ke internet?Kaedah Sambungan Peranti NB-IoTBagaimana Menyediakan Rangkaian untuk Peranti NB?Cara mendapatkan kod padan rangkaian untuk peranti Matter dalam Aplikasi "Rumah"
Device Connection Failure
Device Offline
Isu penggunaan aplikasi
Home, Members & Room Management
Pengurusan dan Kawalan Peranti
Perkhidmatan Nilai Tambah & Fungsi Lanjutan
Isu Kawalan Pihak Ketiga
Panduan Peruntukan Rangkaian Peranti
Soalan Lazim
Manual Pengguna
Help CenterMasalah Rangkaian PerantiPanduan Penyediaan Rangkaian PerantiNetwork Provisioning for Other Protocols/Methods

Bagaimana kamera menggunakan imbasan kod QR untuk mengkonfigurasi rangkaian?

Panduan langkah demi langkah untuk mengkonfigurasi sambungan rangkaian kamera menggunakan imbasan kod QR.

Follow these steps to configure your camera's network connection using QR code scanning.

Configuration Steps

1. Add Device Manually

  1. Open the app home page
  2. Tap the plus sign in the upper right corner
  3. Select Add Device
  4. Choose Manual Add
  5. Navigate to Camera/Lock category
  6. Select the corresponding category

2. Reset Device to Unconfigured State

Reset the device to the unconfigured state:

  1. Connect the power supply
  2. Press and hold the reset button on the device for about 5 seconds
  3. Wait until the indicator light of the device starts to flash quickly
  4. The device enters the network configuration state
  5. Confirm the indicator light or prompt tone
  6. Click Next in the app

Common Operation: Connect the power supply, press and hold the reset button on the device for about 5 seconds, until the indicator light of the device starts to flash quickly, the device enters the network configuration state. Please refer to the instructions for details.

3. Select Wi-Fi Network

  1. Follow the prompts in the app
  2. Select the corresponding 2.4GHz Wi-Fi network
  3. Enter the password

Network Restrictions: The camera does not support public wireless networks authenticated by mobile phone verification codes or other verification methods.

4. Display and Scan QR Code

  1. Click "Next"
  2. A QR code will be displayed on the mobile phone screen
  3. Align the QR code with the camera lens
  4. Position the code about 15~20cm away from the camera
  5. Hold steady so that the camera can scan it

5. Complete Configuration

  1. After the scan is successful, you will hear a "beep" prompt sound from the camera
  2. Click "hear the prompt sound" in the app
  3. The camera will enter the network configuration process

Troubleshooting

If the camera still fails to connect successfully through the above steps, please refer to:

Device Connection Failure

What should I do when my device fails to connect to the network?

Separate Wi-Fi Bands

(For most of Routers) How to configure separate Wi-Fi SSIDs for 2.4 GHz and 5 GHz bands? Split your network into 2 frequency bands.

Isi Kandungan

Configuration Steps
1. Add Device Manually
2. Reset Device to Unconfigured State
3. Select Wi-Fi Network
4. Display and Scan QR Code
5. Complete Configuration
Troubleshooting