LogoSmartLife App-dokumentasjon
LogoSmartLife App-dokumentasjon
Forside
Help Center
Enhetens nettverksproblemer
Ruterkonfigurasjon
Veiledning for nettverkskonfigurering av enheter
Generelle Spørsmål om Enhetens Nettverksoppsett
Bluetooth-klargjøringsveiledning
Wi-Fi enhetsnettverkstilrettelegging
Zigbee-enhetsnettverksklargjøring
Hvordan sette Zigbee sensorenheter i paringsmodus?Trenger jeg en Zigbee-gateway for å administrere Zigbee-enhetene mine?Zigbee gateway-grenseHvor mange underenheter kan jeg koble til en Bluetooth-gateway/Zigbee-gateway?Hvorfor må jeg legge til en gateway før jeg legger til en Zigbee-enhet?Hvordan legger jeg til en Zigbee-gateway?Hvordan konfigurerer jeg nettverkstilkoblinger for ZigBee-enheter?Hvordan tilbakestille Zigbee-enhet til konfigurasjonsstatusHvordan legge til enhet i appen for Internett-tilkobling(Zigbee)?
Network Provisioning for Other Protocols/Methods
Device Connection Failure
Device Offline
Appbruksproblemer
Home, Members & Room Management
Enhetsadministrasjon og kontroll
Verdiøkende tjenester og utvidede funksjoner
Tredjepartskontrollproblemer
Veiledning for enhetsnettverksoppsett
Ofte stilte spørsmål
Brukerhåndbok
Help CenterEnhetens nettverksproblemerVeiledning for nettverkskonfigurering av enheterZigbee-enhetsnettverksklargjøring

Hvordan legge til enhet i appen for Internett-tilkobling(Zigbee)?

Lær hvordan du legger til Zigbee trådløse gatewayer, kablede gatewayer og underenheter til smart hjemmenettverket ditt via appen.

Adding Zigbee Wireless Gateway

  1. Open the "Home" App, click on the add button "+" in the top right corner of the page;
  2. On the "Select Device Type" page, find "Gateway Control" and select the corresponding gateway (Zigbee);
  3. Select the 2.4GHz Wi-Fi band in your home and enter the network name and Wi-Fi password;
  4. Follow the product manual and App instructions to reset the Zigbee gateway (usually by pressing the reset button of the Zigbee gateway for 5 seconds until the indicator light flashes, refer to the manual for specifics);
  5. Once added successfully, you can find the Zigbee gateway in the "Home" list.

Adding Zigbee Wired Gateway

  1. Open the "Home" App, click on the add button "+" in the top right corner of the page;
  2. On the "Select Device Type" page, find "Gateway Control" and select the corresponding gateway (Zigbee);
  3. Connect the gateway to power and to the home router, ensuring that the phone and the gateway are on the same network, please confirm that the indicator light stays on;
  4. Once added successfully, you can find the Zigbee gateway in the "Home" list.

Adding Zigbee Sub-devices

  1. Open the "Home" App, click on the add button "+" in the top right corner of the page;
  2. On the "Select Device Type" page, find the corresponding category, select the corresponding device (Zigbee);
  3. Then select the Zigbee gateway you want to add the sub-device to (the distance between the Zigbee gateway and the sub-device should not exceed 5 meters);
  4. Follow the product manual and App instructions to reset the Zigbee sub-device to pairing mode (usually by pressing the reset button of the Zigbee sub-device for 5 seconds until the indicator light flashes, refer to the manual for specifics);
  5. Once added successfully, you can find the Zigbee sub-device in the "Home" list.

Related Articles

  • Zigbee Device Network Provisioning
  • Why do I have to add a gateway before I add a Zigbee device?
  • Do I Need a Zigbee Gateway to Manage My Zigbee Devices?
  • How to Put Zigbee Sensor Devices into Pairing Mode?

Innholdsfortegnelse

Adding Zigbee Wireless Gateway
Adding Zigbee Wired Gateway
Adding Zigbee Sub-devices
Related Articles