LogoInyandiko za SmartLife App
LogoInyandiko za SmartLife App
Intangiriro
Help Center
Ibibazo byo guhuza ibikoresho kuri network
Ibibazo byo Gukoresha Porogaramu
Kwiyandikisha konti, kwinjira no gusesa
Time Settings & Scheduling Management
Message Center & App Pushes
Weather Function-Related
Scene and Automation
Gukoresha ibikorwa n'ibisobanuro by'amategeko
Gukemura ibibazo bya Scenes & Automation
Basic Operations & Configuration Management
Nigute nhagarika by'igihe akazi k'ikoranabuhanga?Nigute ukuraho amakarita yasabwe ku rupapuro rwa Smart?Nigute uzima ibikorwa byo gukanda kabiri kugirango bikore?Nigute wakora ikiganiro gifite amatara yazimye mugihe ujya ku kazi kandi yakamuye nyuma y'akazi?Nigute ushyiraho Kanda kugirango utangire na Automation?如何設定智慧場景？Nigute nsiba ibisabwa bimwe, igikoresho, cyangwa umurimo uhereye kuri Tap-To-Run cyangwa Automation?Nshobora gushyiraho igihe cyihariye cya automation?Nigute usiba ibikorwa (Kanda kugirango bikore/Uburyo bwikora)? Ibikorwa byasibwe bishobora kugarurwa?Nigute nshobora guhindura amazina y'amashusho?Nigute werekana Ibikoresho n'ibintu byo Gukanda-kugirango-bikore muri verisiyo ya Watch y'Porogaramu?Nigute nkoresha ibikoresho kandi nkore Tap-to-Run ukoresheje verisiyo ya Watch ya App?
Porogaramu na Sisitemu
Problem Feedback
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Icyerekezo cyo gushyiraho uruhurirane rwa dispositivi
Ibibazo bikunze kubazwa
Igitabo Cyo Gukoresha
Help CenterIbibazo byo Gukoresha PorogaramuScene and AutomationBasic Operations & Configuration Management

Nigute ushyiraho Kanda kugirango utangire na Automation?

Wige uko ushyiraho ibisate byo Kanda kugirango utangire n'amategeko ya Automation kugirango ugenzure ibikoresho byawe byo mu rugo rwihuse mu buryo bunoze.

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Tap-to-Run

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Operating device: Add the smart device you want to execute the Tap-to-Run.

For example: you can enable all devices in your home without going to enable the device one by one.

Operating device example

Select smart: Add the automation you want to perform with Tap-to-Run (The existing automation is required in advance).

For example: you can use Tap-to-Run to open your setting automation without triggering any conditions of automation.

Select smart example

Delay: add a delayed task.

For example: you can add a delay task in Tap-to-Run between two devices actions.

Delay example

Automation

There are four main types of automation are supported in the App. You can set up automation to fully use the home devices and start your SmartLife.

When the weather changes: The linkage between external environment conditions and the smart devices, the following external environment conditions can be selected.

For example, you can set 'when the temperature is higher than 29℃, turn on the air conditioner.'

Weather changes example

When the location changes: The linkage between the geographic location and the device.

For example, you can set 'turn on the air conditioner and water heater automatically when you are near the house, or turn off all home Appliances and turn on motion detection function of the camera when you leave the house.'

Location changes example

Schedule: The linkage between schedule function and the devices.

For example, you can set 'open the curtain at 8am on working days.'

Schedule example

When the device status changes: The linkage between the device status change and the devices.

For example, you can set 'when the air conditioner is on, the aroma diffuser and air purifier will be automatically turned on, or when the door sensor is on, the alarm will be triggered.'

Device status changes example

Urutonde rw'Ibikubiyemo

Tap-to-Run
Automation