LogoInyandiko za SmartLife App
LogoInyandiko za SmartLife App
Intangiriro
Help Center
Ibibazo byo guhuza ibikoresho kuri network
Gutegura Router
Ubuyobozi bwo gutunganya umuyoboro w'ibikoresho
Ibibazo Rusange ku Gutanga Umuyoboro w'Igikoresho
Amabwiriza yo Gutanga Bluetooth
Gutegura Umuyoboro w'Ibikoresho bya Wi-Fi
Gutanga umuyoboro w'ibikoresho bya Zigbee
Network Provisioning for Other Protocols/Methods
Ni gute wongeraho igikoresho uko usoma kode ya QR?Kamera ikoresha ute gusikana kode ya QR kugirango itegure umuyoboro?Nigute ushiraho umuyoboro kubikoresho bya 4G?Nigute ugenzura ibikoresho bya Wi-Fi na Bluetooth bifite uburyo bubiri ukoresheje Bluetooth gusa?Ibikoresho bya Wi-Fi na Bluetooth dual-mode birashobora kongerwa icyarimwe hamwe n'uburyo bubiri bwo gutumanaho?Igikoresho gikoresha gute uburyo bwa kabuli kugirango gihuze na interineti?Uburyo bwo guhuza ibikoresho bya NB-IoTNigute Ushyiraho Umuyoboro ku Bikoresho bya NB?Uburyo bwo kubona kode yo guhuza umuyoboro kubikoresho bya Matter muri porogaramu "Home"
Device Connection Failure
Device Offline
Ibibazo byo Gukoresha Porogaramu
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Icyerekezo cyo gushyiraho uruhurirane rwa dispositivi
Ibibazo bikunze kubazwa
Igitabo Cyo Gukoresha
Help CenterIbibazo byo guhuza ibikoresho kuri networkUbuyobozi bwo gutunganya umuyoboro w'ibikoreshoNetwork Provisioning for Other Protocols/Methods

Kamera ikoresha ute gusikana kode ya QR kugirango itegure umuyoboro?

Ubuyobozi bwo ku ntambwe kugirango utegure guhuza umuyoboro wa kamera ukoresheje gusikana kode ya QR.

Follow these steps to configure your camera's network connection using QR code scanning.

Configuration Steps

1. Add Device Manually

  1. Open the app home page
  2. Tap the plus sign in the upper right corner
  3. Select Add Device
  4. Choose Manual Add
  5. Navigate to Camera/Lock category
  6. Select the corresponding category

2. Reset Device to Unconfigured State

Reset the device to the unconfigured state:

  1. Connect the power supply
  2. Press and hold the reset button on the device for about 5 seconds
  3. Wait until the indicator light of the device starts to flash quickly
  4. The device enters the network configuration state
  5. Confirm the indicator light or prompt tone
  6. Click Next in the app

Common Operation: Connect the power supply, press and hold the reset button on the device for about 5 seconds, until the indicator light of the device starts to flash quickly, the device enters the network configuration state. Please refer to the instructions for details.

3. Select Wi-Fi Network

  1. Follow the prompts in the app
  2. Select the corresponding 2.4GHz Wi-Fi network
  3. Enter the password

Network Restrictions: The camera does not support public wireless networks authenticated by mobile phone verification codes or other verification methods.

4. Display and Scan QR Code

  1. Click "Next"
  2. A QR code will be displayed on the mobile phone screen
  3. Align the QR code with the camera lens
  4. Position the code about 15~20cm away from the camera
  5. Hold steady so that the camera can scan it

5. Complete Configuration

  1. After the scan is successful, you will hear a "beep" prompt sound from the camera
  2. Click "hear the prompt sound" in the app
  3. The camera will enter the network configuration process

Troubleshooting

If the camera still fails to connect successfully through the above steps, please refer to:

Device Connection Failure

What should I do when my device fails to connect to the network?

Separate Wi-Fi Bands

(For most of Routers) How to configure separate Wi-Fi SSIDs for 2.4 GHz and 5 GHz bands? Split your network into 2 frequency bands.

Urutonde rw'Ibikubiyemo

Configuration Steps
1. Add Device Manually
2. Reset Device to Unconfigured State
3. Select Wi-Fi Network
4. Display and Scan QR Code
5. Complete Configuration
Troubleshooting