LogoSmartLife App dokumentacija
LogoSmartLife App dokumentacija
Domača stran
Help Center
Težave z omrežjem naprave
Težave z uporabo aplikacije
Registracija računa, prijava in preklic
Time Settings & Scheduling Management
Center sporočil in potisna obvestila aplikacije
Weather Function-Related
Scene and Automation
Uporaba funkcij in razlage pravil
Odpravljanje težav s prizori in avtomatizacijo
Basic Operations & Configuration Management
Kako začasno izklopim nalogo za avtomatizacijo?Kako izbrisati priporočene kartice na strani Smart?Kako izklopiti funkcijo dvojnega dotika za zagon?Kako ustvariti sceno z ugasnjeno žarnico, ko greste na delo, in prižgano po delu?Kako konfigurirati Dotik za zagon in Avtomatizacijo?如何設定智慧場景？Kako izbrišem posamezen pogoj, napravo ali opravilo iz Tap-To-Run ali Avtomatizacije?Ali lahko nastavim časovno obdobje za avtomatizacijo?Kako izbrisati prizor (Tapnite za zagon/Avtomatizacija)? Ali lahko izbrisani prizor obnovite?Kako preimenovati prizore?Kako prikazati naprave in elemente Tapnite-za-zagon v različici Watch aplikacije?Kako upravljati naprave in zagnati Tap-to-Run prek različice aplikacije za uro?
Programska oprema in sistem
Problem Feedback
Home, Members & Room Management
Upravljanje in nadzor naprav
Storitve z dodano vrednostjo in razširjene funkcije
Težave z nadzorom tretjih oseb
Vodnik za nastavitev omrežja naprave
Pogosto zastavljena vprašanja
Uporabniški priročnik
Help CenterTežave z uporabo aplikacijeScene and AutomationBasic Operations & Configuration Management

Kako konfigurirati Dotik za zagon in Avtomatizacijo?

Naučite se, kako nastaviti prizore Dotik za zagon in pravila Avtomatizacije za učinkovito upravljanje pametnih domačih naprav.

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Tap-to-Run

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Operating device: Add the smart device you want to execute the Tap-to-Run.

For example: you can enable all devices in your home without going to enable the device one by one.

Operating device example

Select smart: Add the automation you want to perform with Tap-to-Run (The existing automation is required in advance).

For example: you can use Tap-to-Run to open your setting automation without triggering any conditions of automation.

Select smart example

Delay: add a delayed task.

For example: you can add a delay task in Tap-to-Run between two devices actions.

Delay example

Automation

There are four main types of automation are supported in the App. You can set up automation to fully use the home devices and start your SmartLife.

When the weather changes: The linkage between external environment conditions and the smart devices, the following external environment conditions can be selected.

For example, you can set 'when the temperature is higher than 29℃, turn on the air conditioner.'

Weather changes example

When the location changes: The linkage between the geographic location and the device.

For example, you can set 'turn on the air conditioner and water heater automatically when you are near the house, or turn off all home Appliances and turn on motion detection function of the camera when you leave the house.'

Location changes example

Schedule: The linkage between schedule function and the devices.

For example, you can set 'open the curtain at 8am on working days.'

Schedule example

When the device status changes: The linkage between the device status change and the devices.

For example, you can set 'when the air conditioner is on, the aroma diffuser and air purifier will be automatically turned on, or when the door sensor is on, the alarm will be triggered.'

Device status changes example

Kazalo vsebine

Tap-to-Run
Automation