LogoHati za SmartLife App
LogoHati za SmartLife App
Ukurasa Mkuu
Help Center
Matatizo ya Mtandao wa Kifaa
Matatizo ya Matumizi ya Programu
Usajili wa Akaunti, Kuingia na Kufuta
Time Settings & Scheduling Management
Kituo cha Ujumbe na Arifa za Programu
Weather Function-Related
Scene and Automation
Matumizi ya Kazi na Maelezo ya Kanuni
Kutatua Matatizo ya Mandhari na Utendaji wa Kiotomatiki
Basic Operations & Configuration Management
Ninawezaje kuzima Kazi la Automation kwa muda?Jinsi ya kufuta kadi zilizopendekezwa kwenye ukurasa wa Smart?Jinsi ya kuzima kipengele cha Double-check Tap-to-Run?Jinsi ya kuunda mandhari yenye balbu iliyozimwa unapoenda kazini na kuwashwa baada ya kazi?Jinsi ya kusanidi Gusa ili Kuendesha na Otomatiki?如何設定智慧場景？Ninafutaje hali moja, kifaa, au kazi kutoka kwa Tap-To-Run au Automation?Je, ninaweza kuweka kipindi cha muda kwa automatisheni?Jinsi ya kufuta scene (Gusa ili Kuendesha/Automation)? Scene iliyofutwa inaweza kurejeswa?Jinsi ya kubadilisha jina la mandhari?Jinsi ya kuonyesha Vifaa na vipengele vya Gusa-ili-uendeshe katika toleo la Watch la Programu?Jinsi ya kudhibiti vifaa na kuendesha Tap-to-Run kupitia toleo la Saa la Programu?
Programu na Mfumo
Problem Feedback
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Mwongozo wa Usanidi wa Mtandao wa Kifaa
Maswali Yanayoulizwa Mara kwa Mara
Mwongozo wa Mtumiaji
Help CenterMatatizo ya Matumizi ya ProgramuScene and AutomationBasic Operations & Configuration Management

Jinsi ya kusanidi Gusa ili Kuendesha na Otomatiki?

Jifunze jinsi ya kusanidi mandhari ya Gusa ili Kuendesha na kanuni za Otomatiki ili kudhibiti vifaa vyako vya nyumbani kwa ufanisi.

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Tap-to-Run

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Operating device: Add the smart device you want to execute the Tap-to-Run.

For example: you can enable all devices in your home without going to enable the device one by one.

Operating device example

Select smart: Add the automation you want to perform with Tap-to-Run (The existing automation is required in advance).

For example: you can use Tap-to-Run to open your setting automation without triggering any conditions of automation.

Select smart example

Delay: add a delayed task.

For example: you can add a delay task in Tap-to-Run between two devices actions.

Delay example

Automation

There are four main types of automation are supported in the App. You can set up automation to fully use the home devices and start your SmartLife.

When the weather changes: The linkage between external environment conditions and the smart devices, the following external environment conditions can be selected.

For example, you can set 'when the temperature is higher than 29℃, turn on the air conditioner.'

Weather changes example

When the location changes: The linkage between the geographic location and the device.

For example, you can set 'turn on the air conditioner and water heater automatically when you are near the house, or turn off all home Appliances and turn on motion detection function of the camera when you leave the house.'

Location changes example

Schedule: The linkage between schedule function and the devices.

For example, you can set 'open the curtain at 8am on working days.'

Schedule example

When the device status changes: The linkage between the device status change and the devices.

For example, you can set 'when the air conditioner is on, the aroma diffuser and air purifier will be automatically turned on, or when the door sensor is on, the alarm will be triggered.'

Device status changes example

Jedwali la Yaliyomo

Tap-to-Run
Automation