LogoSmartLife App hujjatlari
LogoSmartLife App hujjatlari
Bosh sahifa
Help Center
Qurilma tarmog'i muammolari
Ilovadan foydalanish muammolari
Hisob ro'yxatdan o'tkazish, kirish va bekor qilish
Time Settings & Scheduling Management
Xabarlar markazi va ilova push xabarnomalar
Weather Function-Related
Scene and Automation
Funktsiyalardan foydalanish va qoidalar tushuntirish
Sahnalar va Avtomatlashtirish Muammolarini Bartaraf Etish
Basic Operations & Configuration Management
Avtomatlashtirish vazifasini vaqtincha qanday o'chirish mumkin?Smart sahifasidagi tavsiya etilgan kartalarni qanday o'chirish mumkin?Ikki marta bosish orqali ishga tushirish funksiyasini qanday o'chirish mumkin?Ishga ketganingizda lampochka o'chirilgan va ishdan keyin yonib turgan sahnani qanday yaratish mumkin?Tap-to-Run va Avtomatlashtirish qanday sozlanadi?Aqlli sahnalarni qanday sozlash mumkin?Tap-To-Run yoki Avtomatlashtirish dan bitta shart, qurilma yoki vazifani qanday o'chiraman?Avtomatlashtirish uchun vaqt oralig'ini o'rnatishim mumkinmi?Sahnani qanday o'chirish mumkin (Ishga tushirish uchun bosing/Avtomatlashtirish)? O'chirilgan sahnani tiklash mumkinmi?Sahnalarni qanday qayta nomlash mumkin?Ilovaning Watch versiyasida Qurilmalar va Bosish-ishga-tushirish elementlarini qanday ko'rsatish mumkin?Ilovaning Soat versiyasi orqali qurilmalarni qanday boshqarish va Tap-to-Run ni ishga tushirish mumkin?
Dasturiy ta'minot va tizim
Problem Feedback
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Qurilma tarmog'ini sozlash qo'llanmasi
Ko'p beriladigan savollar
Foydalanuvchi qoʻllanmasi
Help CenterIlovadan foydalanish muammolariScene and AutomationBasic Operations & Configuration Management

Tap-to-Run va Avtomatlashtirish qanday sozlanadi?

Aqlli uy qurilmalaringizni samarali boshqarish uchun Tap-to-Run sahnalari va Avtomatlashtirish qoidalarini qanday o'rnatishni o'rganing.

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Tap-to-Run

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Operating device: Add the smart device you want to execute the Tap-to-Run.

For example: you can enable all devices in your home without going to enable the device one by one.

Operating device example

Select smart: Add the automation you want to perform with Tap-to-Run (The existing automation is required in advance).

For example: you can use Tap-to-Run to open your setting automation without triggering any conditions of automation.

Select smart example

Delay: add a delayed task.

For example: you can add a delay task in Tap-to-Run between two devices actions.

Delay example

Automation

There are four main types of automation are supported in the App. You can set up automation to fully use the home devices and start your SmartLife.

When the weather changes: The linkage between external environment conditions and the smart devices, the following external environment conditions can be selected.

For example, you can set 'when the temperature is higher than 29℃, turn on the air conditioner.'

Weather changes example

When the location changes: The linkage between the geographic location and the device.

For example, you can set 'turn on the air conditioner and water heater automatically when you are near the house, or turn off all home Appliances and turn on motion detection function of the camera when you leave the house.'

Location changes example

Schedule: The linkage between schedule function and the devices.

For example, you can set 'open the curtain at 8am on working days.'

Schedule example

When the device status changes: The linkage between the device status change and the devices.

For example, you can set 'when the air conditioner is on, the aroma diffuser and air purifier will be automatically turned on, or when the door sensor is on, the alarm will be triggered.'

Device status changes example

Mundarija

Tap-to-Run
Automation