LogoSmartLife App Dokumentácia
LogoSmartLife App Dokumentácia
Hlavná stránka
Help Center
Problémy so sieťou zariadenia
Problémy s používaním aplikácie
Registrácia účtu, prihlásenie a zrušenie
Time Settings & Scheduling Management
Centrum správ a push notifikácie aplikácie
Weather Function-Related
Scene and Automation
Použitie funkcií a vysvetlenie pravidiel
Riešenie problémov so scénami a automatizáciou
Basic Operations & Configuration Management
Ako dočasne vypnem úlohu automatizácie?Ako odstrániť odporúčané karty na stránke Smart?Ako vypnúť funkciu dvojitého ťuknutia na spustenie?Ako vytvoriť scénu so žiarovkou vypnutou, keď idete do práce a zapnutou po práci?Ako nakonfigurovať Ťuknutie na spustenie a Automatizáciu?如何設定智慧場景?Ako odstrániť jednu podmienku, zariadenie alebo úlohu z Tap-To-Run alebo Automatizácie?Môžem nastaviť časové obdobie pre automatizáciu?Ako odstrániť scénu (Ťuknutím spustiť/Automatizácia)? Dá sa odstránená scéna obnoviť?Ako premenovať scény?Ako zobraziť zariadenia a položky Ťuknutím spustiť vo verzii Watch aplikácie?Ako ovládať zariadenia a spúšťať Tap-to-Run prostredníctvom hodinkovej verzie aplikácie?
Softvér a systém
Problem Feedback
Home, Members & Room Management
Správa a ovládanie zariadení
Služby s pridanou hodnotou a rozšírené funkcie
Problémy s ovládaním tretích strán
Sprievodca nastavením siete zariadenia
Často kladené otázky
Používateľská príručka
Help CenterProblémy s používaním aplikácieScene and AutomationBasic Operations & Configuration Management

Ako nakonfigurovať Ťuknutie na spustenie a Automatizáciu?

Naučte sa, ako nastaviť scény Ťuknutie na spustenie a pravidlá Automatizácie na efektívne ovládanie inteligentných domácich zariadení.

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Tap-to-Run

There are three types of Tap-to-Run in the App. You can quickly start smart devices in your home by setting up Tap-to-Run, eliminating the setting step one by one.

Operating device: Add the smart device you want to execute the Tap-to-Run.

For example: you can enable all devices in your home without going to enable the device one by one.

Operating device example

Select smart: Add the automation you want to perform with Tap-to-Run (The existing automation is required in advance).

For example: you can use Tap-to-Run to open your setting automation without triggering any conditions of automation.

Select smart example

Delay: add a delayed task.

For example: you can add a delay task in Tap-to-Run between two devices actions.

Delay example

Automation

There are four main types of automation are supported in the App. You can set up automation to fully use the home devices and start your SmartLife.

When the weather changes: The linkage between external environment conditions and the smart devices, the following external environment conditions can be selected.

For example, you can set 'when the temperature is higher than 29℃, turn on the air conditioner.'

Weather changes example

When the location changes: The linkage between the geographic location and the device.

For example, you can set 'turn on the air conditioner and water heater automatically when you are near the house, or turn off all home Appliances and turn on motion detection function of the camera when you leave the house.'

Location changes example

Schedule: The linkage between schedule function and the devices.

For example, you can set 'open the curtain at 8am on working days.'

Schedule example

When the device status changes: The linkage between the device status change and the devices.

For example, you can set 'when the air conditioner is on, the aroma diffuser and air purifier will be automatically turned on, or when the door sensor is on, the alarm will be triggered.'

Device status changes example

Obsah

Tap-to-Run
Automation