LogoSmartLife App Docs
LogoSmartLife App Docs
Homepage
Help Center
Device Networking Issues
App Use Issues
Home, Members & Room Management
Device Management and Control
Device Basic Settings & Function Operations
Device Troubleshooting
Abnormal Device Control & Response
May function failure ang aking device?Hindi gumagana ang button sa plug para i-on/off?Hindi ma-off ang device sa pamamagitan ng App?Ang device ay maaari lamang i-on at hindi ma-off?Bakit maaaring kontrolin ang device sa parehong network ngunit hindi makontrol sa ibang mga network?Bakit hindi mapamahalaan ng App ang Bluetooth controller?Hindi tumutugon ang aking Smart device, hindi ito makontrol?Gumamit ako ng Bluetooth mesh gateway, ngunit bakit hindi isinasagawa ng aking Bluetooth mesh device ang mga command?Mabilis at stable ang aking network, ngunit kapag ginagamit ang App para kontrolin ang device, laging mataas ang latency ng device?Ano ang dapat kong gawin kung hindi makontrol ng App ang device?
Abnormal Device Status & Display
Value-added Services & Extended Functions
Third-party Control Issues
Device Network Provisioning Guide
Frequently Asked Questions
Manwal ng Gumagamit
Help CenterDevice Management and ControlDevice TroubleshootingAbnormal Device Control & Response

Hindi ma-off ang device sa pamamagitan ng App?

Pag-troubleshoot ng pag-off ng device sa pamamagitan ng App

Dear user. Please check in the following ways:

  1. Please check the device box or product manual, and make sure that the App recommended is our App. If it is not, compatibility problems are likely to occur, resulting in the situation that the device can only be opened and cannot be closed after the device is successfully added.

  2. If your device is a low-power device such as a sensor or devices that use batteries, it cannot be turned off. If you do not need it to continue working, please remove it from the App or completely power off the device.

  3. If it's not a low-power device. Please reset the device to factory setting and add it again. Then check whether you can turn off it by App.

  4. The smart device still needs very little power after you turn it off remotely. This is to maintain the connection to the network so that you can turn it on and operate it remotely when needed. If you need to turn off the smart device completely, you need to manually cut off the power of the device.

If you still cannot turn off it, please use the physical button and check whether you can turn off it. If you cannot turn off it by the physical button, please contact the manufacturer to check the hardware. Thanks for your understanding and support.