LogoSmartLife App Docs
LogoSmartLife App Docs
Homepage
Help Center
Device Networking Issues
Router Configuration
Device Network Provisioning Guide
General Q&A on Device Network Provisioning
Bluetooth Provisioning Guide
How to put Bluetooth lighting devices into pairing mode?What are the requirements for a Bluetooth mesh device layout?How do I remove a Bluetooth mesh device?Do I have to re-configure Bluetooth mesh devices if I change to a different mobile phone?Can I still control my Bluetooth mesh device that has been moved to another location in my mobile phone App?What is the longest distance allowed for the App to control bluetooth device?How many Bluetooth devices can be added to the app? Why can't I add a few after adding?How many devices can be paired to the Bluetooth mesh network at most?How to reset the Bluetooth device to the state to be configured?Should Bluetooth mesh devices be added under the gateway or separately?When I connect a Bluetooth product, do I need to turn on Wi-Fi or data on my phone?How do I add a device to the App and connect it to the Internet Bluetooth?How do I add a Bluetooth gateway?
Wi-Fi Device Network Provisioning
Zigbee Device Network Provisioning
Network Provisioning for Other Protocols/Methods
Device Connection Failure
Device Offline
App Use Issues
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Device Network Provisioning Guide
Frequently Asked Questions
Manwal ng Gumagamit
Help CenterDevice Networking IssuesDevice Network Provisioning GuideBluetooth Provisioning Guide

What are the requirements for a Bluetooth mesh device layout?

Learn about the spatial and technical requirements for setting up an effective Bluetooth mesh network.

Theoretically, Bluetooth mesh devices can cover an indefinitely large space because they can function as trunks to transmit data to each other.

Communication Distance

The effective communication distance indoors between each two Bluetooth mesh devices is about 10 meters (assuming there are no metal barriers or multiple walls in the middle).

The 10-meter range assumes ideal conditions with no metal barriers or multiple walls between devices.

Device Placement Requirements

To ensure an effective Bluetooth mesh communication network, you must follow these placement guidelines:

  • A Bluetooth mesh device that is powered by a socket must be available within the 10-meter radius circle of another Bluetooth mesh device
  • This creates a continuous relay network across your space
  • Each socket-powered device acts as a repeater to extend the network coverage

Battery-Powered Devices

Battery-powered devices, such as low-power sensors, have important limitations:

  • Do not have data relay functions
  • Cannot act as network repeaters
  • Only communicate directly with nearby socket-powered devices
  • Should be placed within range of at least one socket-powered mesh device

Best Practices

For optimal Bluetooth mesh network performance:

  1. Place socket-powered devices strategically to create overlapping coverage zones
  2. Ensure no gap larger than 10 meters exists between socket-powered devices
  3. Position battery-powered sensors within range of socket-powered relay devices
  4. Consider physical barriers when planning device placement

Talaan ng mga Nilalaman

Communication Distance
Device Placement Requirements
Battery-Powered Devices
Best Practices