LogoSmartLife App Docs
LogoSmartLife App Docs
Homepage
Help Center
Device Networking Issues
Router Configuration
Device Network Provisioning Guide
General Q&A on Device Network Provisioning
Bluetooth Provisioning Guide
How to put Bluetooth lighting devices into pairing mode?What are the requirements for a Bluetooth mesh device layout?How do I remove a Bluetooth mesh device?Do I have to re-configure Bluetooth mesh devices if I change to a different mobile phone?Can I still control my Bluetooth mesh device that has been moved to another location in my mobile phone App?What is the longest distance allowed for the App to control bluetooth device?How many Bluetooth devices can be added to the app? Why can't I add a few after adding?How many devices can be paired to the Bluetooth mesh network at most?How to reset the Bluetooth device to the state to be configured?Should Bluetooth mesh devices be added under the gateway or separately?When I connect a Bluetooth product, do I need to turn on Wi-Fi or data on my phone?How do I add a device to the App and connect it to the Internet Bluetooth?How do I add a Bluetooth gateway?
Wi-Fi Device Network Provisioning
Zigbee Device Network Provisioning
Network Provisioning for Other Protocols/Methods
Device Connection Failure
Device Offline
App Use Issues
Home, Members & Room Management
Device Management and Control
Value-added Services & Extended Functions
Third-party Control Issues
Device Network Provisioning Guide
Frequently Asked Questions
Manwal ng Gumagamit
Help CenterDevice Networking IssuesDevice Network Provisioning GuideBluetooth Provisioning Guide

How to reset the Bluetooth device to the state to be configured?

Learn how to reset Bluetooth devices to pairing mode for different device types including those with reset buttons and lighting equipment.

Dear user. You can follow the steps below (this is a general method, please refer to the product manual for specific methods):

Devices with a Reset Button

Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then long press the reset button on the device for about 5 seconds (for switch devices, the reset button is mostly the switch Button itself). Wait a few moments until the indicator light starts blinking rapidly. The device enters the pairing mode. You can add it now.

Lighting Equipment

Firstly, make sure the device is powered off for more than 10 seconds before powering on the device. Then turn on and off three times (on-off-on-off-on) power of the device (2 to 4 seconds between each on and off). Wait a few moments until the lighting starts blinking rapidly (Bluetooth lamp will not blink all the time, it will be on after a few times). The device enters the pairing mode. You can add it now.

Note: Bluetooth devices do not support individual sharing, only sharing by adding family members. After sharing with family members, only one person can control the Bluetooth device at the same time. Other people's Apps will show that the Bluetooth device is offline. Only when the user exits the App, another person can control the Bluetooth device.

Talaan ng mga Nilalaman

Devices with a Reset Button
Lighting Equipment